Panasonic DC-S1HBODY DC-S1H Basic Operating Manual - Page 39
Formatting Cards Initialization
![]() |
View all Panasonic DC-S1HBODY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
2. Getting Started Card Access Indications The card access light turns on while the card is being accessed. Removing a Card 1 Open the card door. 0 Check that the card access light A is turned off and then open the card door. 2 Push the card until it clicks and then pull the card out straight. 0 The card may be warm just after the camera has been used. Be careful when removing. 0 Do not perform the following operations during access. The camera may operate incorrectly or the card and recorded images may be damaged. - Turn off the camera. - Remove the battery or card or disconnect the power plug. - Subject the camera to vibration, impacts, or static electricity. Formatting Cards (Initialization) Format the cards with the camera before use in order to ensure optimal card performance. 0 When a card is formatted, all of the data stored in the card is erased and cannot be restored. Save a backup of necessary data before formatting the card. Select [Card Format] Settings: [Card Slot 1]/[Card Slot 2] 0 Do not turn off the camera or perform another operation during formatting. 0 Take care not to turn off the camera while formatting is in progress. 0 Cards that have not been formatted after purchase should be formatted on the camera. 0 If the card has been formatted with a PC or other device, format it again with the camera. DVQX1939 (ENG) 39
![](/manual_guide/products/panasonic-dcs1hbody-dcs1h-basic-operating-manual-51ec48f/39.png)