Panasonic KX-TDA600 Installation Manual - Page 76
For details about the cards, refer to 2.4.1 BUS-M Card KX-TDA6110, 2.4.2 BUS-ME Card KX
UPC - 037988851775
View all Panasonic KX-TDA600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
2.2 Installation of the Hybrid IP-PBX Connecting Shelves For a 3- or 4-shelf system, you need to install an optional BUS-M card and BUS-ME card(s) in the Basic Shelf. To connect the shelves, plug the Bus Cables (supplied with the BUS-M card or BUS-ME card) into the slots of the BUS-M card. Then, plug the other end of each Bus Cable into the BUS-S card built in to each Expansion Shelf. For details about the cards, refer to "2.4.1 BUS-M Card (KX-TDA6110)", "2.4.2 BUS-ME Card (KXTDA6111)", and "2.5.1 BUS-S Card". Note When installing or removing the BUS-M card, make sure that the DC power supply is turned off. 1. Mount 1 BUS-ME card (for a 3-shelf system), or 2 BUS-ME cards (for a 4-shelf system) on the BUS-M card as shown below. BUS-M Card BUS-ME Card (for Expansion Shelf 3) BUS-ME Card (for Expansion Shelf 2) Screw inside 76 Installation Manual