Panasonic NV-GS500 Operating Instructions - Page 49
Audio dubbing
View all Panasonic NV-GS500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Edit mode ª To cancel the standby for recording When the camera is standby for recording, move the joystick down and select the [∫] icon or press the [∫] button on the remote control. ≥Do not plug or unplug the DV cable during dubbing, or the dubbing may not be completed properly. ≥If a picture (bilingual video, etc.) containing main sound and sub sound has been dubbed, select the desired sound by [SETUP] >> [AUDIO OUT] on playback. ≥Even if you use a device equipped with DV terminals such as IEEE1394, you may not be able to perform digital dubbing in some cases. For more information, see the instructions for equipment connected. ≥Regardless of the menu settings on the recorder, digital dubbing is carried out in the same mode as the [AUDIO REC] mode of the playback tape. ≥The images on the recorder monitor may be disturbed, but it does not affect the recorded images. ≥If a picture containing a copyright protection signal (copy guard) is recorded by the movie camera, the picture is distorted by mosaic-like patterns at playback. ≥Disconnect the USB cable since input signals from the external input terminal cannot be recorded while it is connected with the USB cable. ≥While pictures are input from the DV terminal, the operation icon blinks on instead of appearing from the side of the screen when you press the centre of the joystick. ≥While pictures are input from the DV terminal, the TV aspect will not change even if you change the setting for [TV ASPECT] in the [SETUP] menu. Audio dubbing You can add music or narration to the recorded cassette. (Audio dubbing can only be performed by using the remote control.) ≥Set to Tape Playback Mode. 1 When using an external microphone, securely insert the plug into the [REMOTE/ MIC] terminal. REMOTE/MIC 2 Find a scene that you want to add sound to, and press the [;] button on the remote control. ; 3 Press the [AUDIO DUB] button on the remote control to make audio dubbing ready. A.DUB ; 4 Press the [;] button on the remote control to start audio dubbing. A.DUB ¥ ≥Be sure that the sound is directed towards either the external microphone or the built-in microphone. 5 Press the [;] button on the remote control to stop audio dubbing. 49 VQT0T47