Panasonic PT AX100U Hd Home Cinema Projector - Page 13
Back and bottom view, Connecting, terminals - replacement lamp
UPC - 791871111383
View all Panasonic PT AX100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Preparation About Your Projector J Back and bottom view Connect an RS-232C compatible cable for controlling the projector remotely via your PC. SERIAL Connect an RGB signal cable from your PC. PC IN Connect a YPBPR signal cable. COMPONENT IN S-VIDEO IN Connect a S-VIDEO signal cable. HDMI IN Connect an HDMI signal cable. Connecting terminals VIDEO IN Connect an RCA composite video cable. Connect the Power cord to supply electronic power to the projector. (page 26) AC IN Switch the projector on/off. (page 19) MAIN POWER Air intake port Intake fresh air to control the temperature inside. Lamp unit component Houses the replaceable lamp unit. Contact the projector dealer or an authorized service center for replacement. (page 37) Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kesington MicroSaver Security System. Front leg adjuster (L/R) Screw up/down to adjust the projection angle. (page 15) NOTE: Do not cover the ventilation openings or place anything within 10 cm (4") of the vents as this may cause damage or injury. This projector should only be used with the attached Power cord to ensure optimum performance and avoid damage to the projector. ENGLISH - 13