Panasonic PT AX100U Hd Home Cinema Projector - Page 14

Setting up Screen size and throw distance You can adjust the projection size with 2.0 power zoom lens. Calculate and define the throw distance as follows. Getting Started Screen Projection size (16 : 9) Throw distance (L) Diagonal length (SD) Screen height (SH) Screen width (SW) Minimum distance (LW) Maximum distance (LT) 1.01 m (40") 0.50 m (1'7") 0.89 m (2'11") 1.2 m (3'11") 2.4 m (7'10") 1.27 m (50") 0.62 m (2') 1.11 m (3'7") 1.5 m (4'11") 3.0 m (9'10") 1.52 m (60") 0.75 m (2'5") 1.33 m (4'4") 1.8 m (5'10") 3.7 m (12'1") 1.77 m (70") 0.87 m (2'10") 1.55 m (5'1") 2.1 m (6'10") 4.3 m (14'1") 2.03 m (80") 1.00 m (3'3") 1.77 m (5'9") 2.4 m (7'10") 4.9 m (16') 2.28 m (90") 1.12 m (3'8") 1.99 m (6'6") 2.7 m (8'10") 5.5 m (18') 2.54 m (100") 1.24 m (4') 2.21 m (7'3") 3.1 m (10'2") 6.2 m (20'4") 3.05 m (120") 1.49 m (4'10") 2.66 m (8'8") 3.7 m (12'1") 7.4 m (24'3") 3.81 m (150") 1.87 m (6'1") 3.32 m (10'10") 4.6 m (15'1") 9.3 m (30'6") 5.08 m (200") 2.49 m (8'2") 4.43 m (14'6") 6.2 m (20'4") 12.4 m (40'8") * All measurements above are approximate and may differ slightly from the actual measurements. J Calculation methods for screen dimensions You can calculate more detailed screen dimensions from the screen diagonal. SW = SD x 0.872 SH = SD x 0.490 LW = 1.2244 x SD - 0.056 LT = 2.4449 x SD - 0.056 Unit: m * The results above are approximate and may differ slightly from the actual measurements. NOTE: Do not use the projector at a raised or a horizontally tilted position as it may cause malfunction of the projector. Make sure the projector lens surface is parallel with the screen. You can tilt the projector body approximately ± 30 degrees vertically. Overtilting may result in shortening the component's life. For the best quality of the projection image, install a screen where sun light or room light does not shine directly onto the screen. Close window shades or curtains to block the lights. 14 - ENGLISH