Panasonic PT AX100U Hd Home Cinema Projector - Page 31
Position Menu, H-position, Dot Clock, Clock Phase
UPC - 791871111383
View all Panasonic PT AX100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
POSITION Menu DOT CLOCK If you have interference patterns on the projected image, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency. NOTE: If the projecting signal's dot clock frequency is higher than 150 MHz, the adjustment may not make a difference. See "Navigating through the MENU" on page 26. H - POSITION CLOCK PHASE If you require further adjustment for the same reason as the DOT CLOCK adjustment, you can fine adjust the timing of the clock. Press I H to adjust. You can move the projected image horizontally for fine adjustment. Move left Move right V - POSITION You can move the projected image vertically for fine adjustment. NOTE: If the projecting signal's dot clock frequency is higher than 150 MHz, the adjustment may not make a difference. CLOCK PHASE is not available with 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/24p, 750 (720)/50p and 750 (720)/60p signals using the COMPONENT connection. Move down Move up Settings ENGLISH - 31