Panasonic PT AX100U Hd Home Cinema Projector - Page 19
Switching the projector on/off, Power cord, POWER indicator
UPC - 791871111383
View all Panasonic PT AX100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Switching the projector on/off Power cord Ensure all the input devices are connected and turned off before connecting the Power cord. J Connecting 1. Make sure the shape of the power cord plug and the AC IN connector on the back of the projector match, then push the plug all the way in. 2. Connect the Power cord to a wall socket. J Disconnecting 1. Make sure the MAIN POWER is switched off and unplug the Power cord from the wall socket. 2. Hold the plug and unplug the Power cord from the AC IN connector on the back of the projector. NOTE: Do not use any other Power cord than the one supplied with the projector. Do not force the connector as this may damage the projector and/or the power cord. Dirt or dust build-up around plugs may cause fire or electrical hazards. Switch off the power to the projector when not in use. POWER indicator POWER indicator Basic Operation Indicator status No illumination or flashing RED Lit GREEN Flashing Lit ORANGE Lit Flashing Status The MAIN POWER is switched off. The MAIN POWER is switched on and the projector is standby. The POWER is switched on and the projector is getting ready to project. The projector is ready to project. The POWER is switched off and the projector is cooling the lamp. The POWER is switched on again when cooling the lamp and recovering to projection mode. Recovery may take a while. NOTE: While the projector is cooling the lamp, do not switch the MAIN POWER off or unplug the Power cord. ENGLISH - 19