Panasonic PT AX100U Hd Home Cinema Projector - Page 33

POSITION Menu J Aspect ratio depend on signals Press I H to cycle through the aspect ratio options. The cycle pattern depends on the connected signals. VIDEO/ S-VIDEO PC (RGB) HDMI YPBPR 4:3 \ 16:9 \ 14:9 \ JUST \ ZOOM1 \ ZOOM2 AUTO \ 4:3 \ 16:9 \ JUST \ ZOOM NTSC signal 4:3 \ 16:9 \ V SCROLL 4:3 \ 16:9 VGA or SVGA signals V SCROLL only WIDE768 Not switchable WIDE480/600/720/768-2 signals 4:3 \ 16:9 16:9 \ H - FIT \ V - FIT \ ZOOM 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/24p, 750 (720)/50p and 750 (720)/60p signals 4:3 \ 16:9 \ JUST \ ZOOM 525p (480p) and 625p (576p) signals 4:3 \ 16:9 \ 14:9 \ JUST \ ZOOM1 \ ZOOM2 625i (576i), 625p (576p) AUTO \ 4:3 \ 16:9 \ JUST \ ZOOM 525i (480i), 525p (480p) 16:9 \ H - FIT \ V - FIT 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/24p, 750 (720)/50p, 750 (720)/60p signals WSS KEYSTONE If the projector is aligned non-perpendicularly to the screen, or if the projection screen has an angled surface, you can vertically correct keystone. Image Operation Setting range: -32 to 32 NOTE: You can correct the distortion ± 30 degrees from the vertical plane. For a better quality image, installing the projector with a minimum of distortion is recommended. Some distortion may be retained for Lens shift adjustment. The distortion of the Main menu screen is not correctable. The result of the keystone correction will affect on the aspect ratio and the size of the image. AUTO SETUP You can adjust V - POSITION, H - POSITION, DOT CLOCK and CLOCK PHASE automatically when connecting via PC. Press ENTER to adjust these at the same time. If a PAL/625p (576p)/625i (576i) signal is input and that signal has an identification signal, the aspect ratio is automatically switched to the required setting. You can switch the system off manually. OVER SCAN If the 4 edges of an image is partly dropped, you can use this function to adjust and project it properly. Shrink Enlarge Setting range: 0 to +10 OVER SCAN is not available with PC signals. Settings ENGLISH - 33