Panasonic PT-DW100U Dlp Projector - Multi Language - Page 42
Sub Memory List., Press Enter.
View all Panasonic PT-DW100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Registration of input signal data (continued) 2. Press to select the SUB MEMORY number stored in the "SUB MEMORY LIST". 3. Press ENTER. • A "Change registered signals" screen will appear. ■ On-screen indications # Input switching / signal switching This shows the registered signal name on the status screen for signal switching. INPUT NAME MEMORY NO RGB1 RGB A1(1-2) REGISTER SUB MEMORY? NAME MEMORY NO INPUT fH fV SYNC.STATE SXGA60-A1 -RGB1 64.00kHz 60.00Hz H(POS) V(POS) ENTER REGISTER 4. Press ENTER. $ Details of registered signal REGISTERED SIGNAL STATUS NAME MEMORY NO INPUT fH fV SYNC.STATE SXGA60-A1 A1(1-2) RGB1 63.98kHz 60.02Hz H(POS) V(POS) ENTER RENAME Note • To rename a registered signal, perform steps 4 and 5 on page 41. ■ Procedure to switch to sub memory 1. Press ◄► on normal screen (menu is not displayed). • The screen will show a list of the sub-memory registered for the currently entered signal. 2. Press to select the sub-memory signal to be switched in the "SUB MEMORY LIST". 3. Press ENTER. • Signal will be switched to the one that was selected in Step 2. • The designation can be set by the sub memory items. • MEMORY NO : A1 (1-2) Sub memory number The place in which address code (A1, A2, ..., H7 and H8) signals are registered Note Restrictions • The maximum sub memory items that can be registered for the projector are 96 including the basic signal. ■ How to erase sub memory The currently selected SUB MEMORY is deleted by pressing DEFAULT at the "REGISTERED SIGNAL LIST". 42 - ENGLISH