Panasonic PT-DW100U Dlp Projector - Multi Language - Page 53
Basic Operation, Noise reduction setting, Dynamic iris setting
View all Panasonic PT-DW100U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Noise reduction setting This can be used to adjust pictures if they contain interference as a result of poor quality of the input signal. 1. Press ▲▼ to select "NOISE REDUCTION". PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOR TINT COLOR TEMP. GAMMA SHARPNESS NOISE REDUCTION DYNAMIC IRIS SYSTEM SELECTOR NATURAL 0 0 10 1 DEFAULT DEFAULT 0 OFF OFF AUTO 1 MENU SELECT CHANGE 2. Press ◄► to switch "NOISE REDUCTION". • The setting will change as follows each time ◄► is pressed. 2 (Medium) 3 (High) 1 (Low) OFF (No correction) Dynamic iris setting Pictures with the optimum contrast will be displayed by automatically providing aperture compensation and signal compensation to suit the pictures concerned. 1. Press ▲▼ to select "DYNAMIC IRIS". PICTURE PICTURE MODE CONTRAST BRIGHTNESS COLOR TINT COLOR TEMP. GAMMA SHARPNESS NOISE REDUCTION DYNAMIC IRIS SYSTEM SELECTOR NATURAL 0 0 10 1 DEFAULT DEFAULT 0 OFF OFF AUTO 1 MENU SELECT CHANGE 2. Press ◄► to switch "DYNAMIC IRIS". • The setting will change as follows each time ◄► is pressed. OFF (No correction) 1 (Low) USER 3 (High) 2 (Intermediate) ■ To further adjust the selected compensation amount 3. Select "USER" in step 2. 4. Press ENTER. • The "DYNAMIC IRIS" screen will be displayed. DYNAMIC IRIS AUTO IRIS OFF MANUAL IRIS OFF DYNAMIC GAMMA OFF MENU SELECT CHANGE 5. Use ▲▼ to select the item to be adjusted, and then use ◄► to adjust the amount of correction. ■ AUTO IRIS (Automatic aperture adjustment) OFF (No automatic correction) 1 (Low) 3 (High) 2 (Intermediate) ■ MANUAL IRIS (Fixed aperture adjustment) OFF (No fixed iris) 1 (Low) 63 (High) 2...62 (Intermediate) ■ DYNAMIC GAMMA (signal compensation amount adjustment) OFF (No automatic correction) 1 (Low) 3 (High) 2 (Intermediate) Note • The contrast is set to the maximum level when "DYNAMIC IRIS" is set to "3." • When "FRAME DELAY" is set to "SHORT", the noise reduction setting function cannot be used. ENGLISH - 53 Basic Operation