Panasonic VDRD250 VDRD250 User Guide - Page 123
Connection And Recognition (windows)
UPC - 037988980222
View all Panasonic VDRD250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Connection and recognition (Windows) Connection and recognition (Windows) Connection and recognition procedures After the driver and software applications are installed, the unit must be connected to the computer and be correctly recognized by the computer. ≥ Connect after installing the driver and software applications. ≥ If the supplied CD-ROM is inserted in the computer, remove it. (If the [Setup Menu] is running, wait until it finishes, then remove the CD-ROM.) ≥ If the recognition procedure is not accomplished properly, operation will not be possible after connecting the unit to the computer. ≥ If the unit fails to operate normally, it may mean that you have not conducted the installation or recognition procedure properly. ≥ Be sure to finalize DVD-RW (VR format), DVD-RW (Video format) and DVD-R on this unit, before using them on the computer. Un-finalized discs will not be recognized by the computer. ¬ Connect this unit to the AC adaptor. 1 Insert a disc or card with recorded images in the unit, turn on the unit and then select the unit's operation mode. When using a disc: Select . When using a card: Select . 2 (Only in card playback mode) Press the MENU button, then select [ SETUP] # [ USB FUNCTION] # [PC CONNECT] and press the joystick. ≥ Press the MENU button to exit the menu screen. 3 Connect this unit and a computer. A USB cable (supplied) ≥ Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully. This unit is automatically recognized by the computer. ≥ Do not use any other USB cables except the supplied one. (Operation is not guaranteed with any other USB A cables.) With a computer 123 LSQT1011