Panasonic VDRD250 VDRD250 User Guide - Page 46

Setting date and time ∫ Changing the date and time display style Press the MENU button, then select [ SETUP] # [ DATE/ TIME] # desired display style and press the joystick. ≥ You can also show or change the date and time display by repeatedly pressing the DATE/TIME button on the remote control. [DATE] [D/T] [OFF] 12.15.2006 3:30 PM 12.15.2006 ≥ The recording time is not displayed in disc playback mode. ∫ Changing the display style Press the MENU button, then select [ SETUP] # [ DATE FORMAT] # desired display style and press the joystick. Display style Y/M/D M/D/Y D/M/Y Screen display 2006.12.15 12.15.2006 15.12.2006 ≥ The date and time function are driven by a built-in lithium battery. ≥ Make sure to check the time before recording. ≥ If the time display becomes [--], the built-in lithium battery has run down. Use the following steps to charge the battery. When you turn on the power for the first time after charging, a message asking you to set the date and time will appear. Select [YES] and set the date and time. To recharge the built-in lithium battery Connect the AC adaptor or attach the battery to the unit, and the built-in lithium battery will be recharged. Leave the unit as is for approx. 24 hours, and the battery will save the date and time for approx. 6 months. (Even if the OFF/ON switch is set to OFF, the battery is still being recharged.) Setup 46 LSQT1011