Panasonic VDRD250 VDRD250 User Guide - Page 144

Menus Other menus ∫ [ REC LAMP] ≥ OFF ≥ ON The recording lamp lights during recording and flashes when the unit receives a signal from the remote control. When this is set to [OFF], it does not light during recording. ∫ [ DISPLAY] ≥ OFF ≥ ON The screen indications are selected as shown in the illustration below. OFF ; ON 12.15.2006 SP R 0h00m 0h00m00s ; O.I.S. 12.15.2006 ∫ [ POWER SAVE] ≥ OFF ≥ 5 MINUTES [OFF]: The power saving function is not activated. [5 MINUTES]: When about 5 minutes passed without any operation, this unit automatically turns off to prevent the battery from running down. When you use this unit, turn it on again. ≥ In the following cases, the unit may not turn off even when you set this to [5 MINUTES]. - When using the AC adaptor - When connecting the unit to a computer or printer via the USB cable ∫ [ BEEP SOUND] ≥ OFF ≥ ON This allows operations such as starting and ending recording to be signaled by a beep. When [OFF] is set, no beep is heard when an operation such as recording is started or ended. 144 LSQT1011 Others 1 Beep When you start recording When you turn on the power When this unit is recognized by the computer or the printer, etc. 2 Beeps When you pause recording When you turn off the power 2 Beeps for 4 times When an error occurs e.g. recording not starting. Check the sentence displayed on the screen. (l 147) ∫ [ INITIAL SET] ≥ YES ≥ NO When there is a menu that cannot be selected depending on a combination of functions, set to [YES] for changing the menu settings back to the initial shipping condition. (Language setting cannot be back to the initial shipping condition.) ∫ [ JOYSTICK LED] ≥ OFF ≥ ON If set to [ON], the circumference of the joystick lights up in blue during operation. ∫ [ DEMO DEMO MODE] ≥ OFF ≥ ON This item is used to start the unit demonstration. (Only when using the AC adaptor and the mode dial is at the or position) If you set this to [ON] without inserting a disc or an SD card, this unit is automatically set to the demonstration mode for introducing its functions. If any button is pressed or operated, the demonstration mode is canceled. If no operations take place for approx. 10 minutes, the demonstration mode automatically starts. To terminate the demonstration mode, insert a disc or an SD card, or set this to [OFF]. For normal use, set this function to [OFF].