Pfaff creative sensation Owner's Manual - Page 51

Dynamic spring foot 6D for embroidery Dynamic spring foot 6D for embroidery is active by default when you turn on the machine. The Dynamic spring foot 6D is always recommended for embroidery. If another type of foot is used, e.g., presser foot 6A, deactivate Dynamic spring foot 6D for embroidery. When deactivated, the ActivStitch™ Technology feature will use thread tension instead of thread metering. Presser foot pressure (E) In most cases, you do not need to adjust the presser foot pressure. Specialty techniques may require an adjustment. The higher the number the more pressure on the fabric. Presser foot height embroidery (F) Adjust the height of the presser foot in Embroidery stitch-out mode. Use the + and - icons to either raise or lower the height of the presser foot. Some embroideries may build up under the presser foot. If there is not enough space between the presser foot and the embroidery, the top thread will form loops on the underside of the embroidery. Increase the presser foot height in small steps until the embroidery moves freely under the presser foot. Note: Because the Dynamic spring foot 6D measures the fabric thickness continuously during embroidery, the option to adjust presser foot height in embroidery is only available if Dynamic spring foot 6D for embroidery is deselected. E F PFAFF® creative™ Color Touch Screen 3:13