Pfaff creative sensation Owner's Manual - Page 97
Built-in, designs, Embroidery, collection, Connect the, embroidery unit
View all Pfaff creative sensation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Embroidery Mode - Preparations Built-in designs Over 330 designs are included in the memory in your machine. creative sensation™ Embroidery collection Page through the creative sensation™ Embroidery collection for designs and fonts. The design number, stitch count (number of stitches in the design) and the design size are displayed next to each design. The suggested thread colors for each color number are shown. Connect the embroidery unit There is a covered socket behind the free-arm, see picture. The cover will open automatically when connecting the embroidery unit. 1. Slide the accessory tray off. 2. Slide the embroidery unit onto the free arm of the machine until it plugs Àrmly into the socket. If needed, use the level adjusting feet so that the machine and embroidery unit are even. If the machine is turned off, turn it on. 3. A pop-up tells you to clear the embroidery area and remove the hoop for positioning. Touch OK. The machine will calibrate and the embroidery arm will move to the ready position. This calibration will set your embroidery functions each time you slide on the embroidery unit. Make sure not to calibrate the machine with the embroidery hoop attached as this can damage the needle, presser foot, hoop and/or the embroidery unit. Be sure to clear all materials from around the machine before calibrating so that the embroidery arm does not bump into anything while calibrating. 7:3