Pfaff creative sensation Owner's Manual - Page 63

Sensormatic free-motion (16c) Activate to set the machine in Sensormatic freemotion mode for presser foot 6A. When sewing free-motion at low speed the presser foot will raise and lower with each stitch to hold the fabric on the needle plate while the stitch is being formed. At higher speed, the presser foot Áoats over the fabric while sewing. Skipped stitches can occur if your fabric moves up and down with the needle as you are stitching. Lowering the presser foot height will reduce the space between the presser foot and the fabric and eliminate the skipped stitches. To adjust the presser foot height in Sensormatic free-motion mode, long touch the check box (d) and make adjustments in the pop-up. Note: Be careful not to reduce the presser foot height too much. The fabric must still move freely under the presser foot. Sequence start position (9) When sewing a sequence it is possible to start sewing anywhere in the sequence. Use the arrows (9) to step through the sequence. Read about sequencing in chapter 5. Zoom to all (18) If the stitch or sequence is wider than what can be shown on the screen, you may use the zoom to all icon to see the whole width of the sequence. Note: Zoom to all is only visible if the stitch or sequence is wider than the stitch Àeld. Save options (15) Select where to save your stitch, open the different save options under save (15). a) Save to Personal Àles b) Save to Personal menu c) Save personal default stitch Save to Personal Àles (15a) To save a stitch into your Personal Àles, touch the save icon (15) and select save to Personal Àles (15a). The icon will open a new window where you can select where to save your stitch. You can save either to a folder in your Personal Àles or to an approved external device. c d 15 18 9 15 a b c 4:9 Sewing mode