Philips SE6591B User manual - Page 27

5.20 2 Place the batteries in the correct polarity as indicated and replace the cover. 83.00 17.00 5.20 7.3 Install your phone Before using the handset, the batteries have to be installed and fully charged. Warning When the batteries are inserted for the first time, the unit will not be able to start normally due to the low battery. You must charge the batteries on the base station before you can use the handset. 7.3.1 Install battery Warning Always use AAA rechargeable batteries supplied with your unit. If alkaline batteries are used instead of rechargeable batteries, "Warning Batt" will show on the display and the battery icon will blink quickly. 1 Slide out the battery cover. 7.3.2 Charge battery Warning The handset must be charged for at least 24 hours before using it for the first time. When the battery level becomes low, the low battery sensor warns you by blinking the battery icon. If this occurs during a conversation, an alert tone sounds to inform you that the battery is low. If the battery level becomes exceedingly low, the phone automatically switches off shortly after the icon starts blinking and any function in progress will not be saved. 1 Place the handset on the charging cradle of the base station. A beep is emitted if the handset is placed correctly. 2 The battery icon on the display blinks during charge. 3 The battery icon becomes steady when the handset is fully charged. Note Optimal battery life is reached after 3 cycles of complete charging (over 15 Getting started 25