Philips SE6591B User manual - Page 70
Unable to perform remote, operation
![]() |
UPC - 609585145184
View all Philips SE6591B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
the power adaptor is plugged into mains supply which is switched on. • Check if the answer machine is off, or Answer only mode is selected. • Check to see if the answering machine is memory full. If so, delete some or all messages. • Try switching off the power at the mains socket, and then turn it on again after 1 minute. Unable to perform remote operation • Make sure the remote access is on (see Section 15.6.2). • Make sure you entered the correct remote access code. • Use a touch-tone phone. Note If the above solutions do not help, remove the power from both the handset and the base. Wait for 1 minute and try again. 68 Frequently asked questions
![](/manual_guide/products/phillips-se6591b-user-manual-47932e1/70.png)
68
Frequently asked questions
the power adaptor is plugged into
mains supply which is switched on.
•
Check if the answer machine is off, or
Answer only mode is selected.
•
Check to see if the answering
machine is memory full. If so, delete
some or all messages.
•
Try switching off the power at the
mains socket, and then turn it on
again after 1 minute.
Unable to perform remote
operation
•
Make sure the remote access is on
(see Section 15.6.2).
•
Make sure you entered the correct
remote access code.
•
Use a touch-tone phone.
If the above solutions do not help,
remove the power from both the
handset and the base. Wait for 1 minute
and try again.
Note