Pioneer 1140HD Owner's Manual - Page 100

13 Useful Remote Control Features CBL/SAT control buttons When the CBL/SAT function has been preset by the remote control's learning function, the remote control buttons function as shown below. • When the Mode switch is set to CBL/SAT, the cable 1 converter or satellite broadcast tuner connected to the display, use the buttons shown below to operate the device 6 (3, 4, 5, 8 and 9 for cable converters and 1 to 7 for satellite tuners): • Cable converters or satellite broadcast tuners made by other 2 manufacturers not listed in the system can be controlled using the remote control if buttons 1 to 9 have already learned the functions. See page 92. 7 1 SAT MENU Displays the satellite broadcasting menu screen 3 2 ENTER, / / / ENTER: Activates the selected function / / / : Selects items on the SAT GUIDE screen or SAT MENU screen 8 3 0-9 4 9 Press a button (or buttons) that corresponds to the channel that you want to watch 4 CH +/- Selects a higher or lower channel 5 5 SOURCE  Turns the device sending the image On and Off Mode switch (with "CBL/SAT" selected) 6 SAT GUIDE Displays the satellite broadcasting guide screen • Set up this button with the learning function if necessary 7 RETURN When the CBL/SAT menu is displayed, restores the immediately previous screen 8 CH ENTER* Enters the selected channel with the direct channel selection buttons 9 CH RETURN* Switches between the current channel and the previous channel you were watching * Some cable converter manufacturers do not preset CH ENTER and CH RETURN. Set up these buttons with the learning function if necessary. NOTE • CABLE and SAT cannot be selected at the same time. • The color-highlighted buttons on the remote control can learn the control signal from another device's remote control. 100 En