Pioneer DVR-550H-S Operating Instructions - Page 115
Colour, RGB 0-255, RGB 16-235, YCbCr 4:2:2, YCbCr 4:4:4, Audio Output, Audio, Bitstream Priority, - company
UPC - 012562852980
View all Pioneer DVR-550H-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
The Initial Setup menu 14 Setting Options Explanation Colour RGB (0-255) Use if colours are weak and black appears to 'float' on the RGB (16-235) setting. RGB (16-235) Use this setting if colours appear overly rich and the black too deep on the RGB (0-255) setting. YCbCr 4:2:2 The video signal is output as a 10-bit YCbCr 4:2:2 component signal. This is the standard setting for HDMI-compatible devices. YCbCr 4:4:4 The video signal is output as a 8-bit YCbCr 4:4:4 component signal. • Depending on the connected device some settings may not be available. • When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available. • You cannot choose YCbCr 4:2:2 when the Screen Resolution is set to 720 x 576i (720 x 480i). Audio Output Auto • Dolby Digital, MPEG and DTS sources are output as a bitstream signal. However, depending on the Audio Out setting, number of audio channels, and the HDMIconnected device, Linear PCM audio may be output. PCM All audio signals are converted to Linear PCM (except DTS). Bitstream Priority Select if the connected device is compatible with bitstream audio. This setting is not available when a DVI device is connected. HDMI Control On • Enable the HDMI Control function. Select this option when connected to an HDMI Control-compatible Pioneer plasma display, AV system (amplifier or AV receiver etc.). Off Disable the HDMI Control function. Select this option when not connected to an HDMI Control-compatible component, or when connected to a component manufactured by a company other than Pioneer. • For more information about HDMI Control, see HDMI Control on page 22. • This setting is available even if you are not connected to an HDMI device. • For more information see Troubleshooting on page 126. Options On Screen Display On • The recorder displays operation displays (Stop, Play, etc.) on-screen. Off Switches off the on-screen operation displays. Front Panel Display On • The time is shown in the front panel display when the recorder is in standby. Off The front panel display is switched off in standby. 115 En