Ricoh C311N User Guide - Page 244
USB Speed, Default: Auto Select
UPC - 026649064661
View all Ricoh C311N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Making Printer Settings Using the Control Panel • Gateway Address Specify the gateway address. When [DHCP] is set to [On], the gateway address cannot be changed. To change it, set [DHCP] to [Off]. Contact your network administrator for information about the network configuration. Default: 192.0.0.192 • Frame Type (NW) Default: Auto Select • Auto Select • Ethernet ll • Ethernet 802.2 • Ethernet 802.3 • Ethernet SNAP • Active Protocol 5 Select active protocols. • TCP/IP Default: Active Active, Not Active • NetWare Default: Active Active, Not Active • AppleTalk Default: Active Active, Not Active • Ethernet Speed Select the network speed to operate the printer. Default: Auto Select • Auto Select • 10Mbps Half D. • 10Mbps Full D. • 100Mbps Half D. • 100Mbps Full D. ❖ USB Speed You can make setting for USB Host interface. Default: Auto Select • Full Speed • Auto Select Important ❒ After changing the setting, turn off the power of the printer briefly, and then turn it on again. 60