Ricoh C311N User Guide - Page 5
Handling the Machine - waste toner
UPC - 026649064661
View all Ricoh C311N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Handling the Machine R WARNING: • When replacing the Transfer Unit, turn the main power switch off and wait at least 30 minutes before proceeding with the replacement. • When replacing the Fusing Unit, turn the main power switch off and wait at least 30 minutes before proceeding with the replacement. • Wait for 30 minutes or more after disconnecting the power plug before removing the transfer unit. R CAUTION: • Before moving the machine, unplug the power cord from the wall outlet. If the cord is unplugged abruptly, it could become damaged. Damaged plugs or cords can cause an electrical or fire hazard. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the power cord will not be damaged under the machine. • Do not connect the Ethernet port of the machine to a network that may supply excess voltage, such as a telephone line. Doing so may result in fire or electric shock. • The printer weighs approximately 28 kg (61.7 lb.). When moving the printer, use the inset grips on both sides, and lift slowly in pairs. The printer will break or cause injury if dropped. • When moving the printer after use, do not take out any of the toners, nor the waste toner bottle to prevent toner spill inside the machine. • When moving the printer, use the inset grips on both sides. The printer will break or cause injury if dropped. • Be careful not to trap your fingers when opening or closing the top cover. 5