Ricoh IS330DC User Manual - Page 15

1. Before Use Preparation Before using this scanner as a network delivery scanner, the following preparations are required. ❖ Setting the scanner to be used as a network delivery scanner To use this scanner in a network environment with a delivery server, the following settings are required. ⇒ P.15 "Use as a Network Delivery Scanner" • "Network settings" in Initial setup Make sure that the appropriate basic settings were made, such as the IP address, to allow the scanner to be used as a network scanner. Reference For information about how to make basic settings to allow the scanner to be used as a network scanner, see the Network Quick Installation Guide. • "Delivery options" in Scanner settings Select delivery options and make the necessary settings to use the scanner as a network delivery scanner. • "Delivery server IP address" in Network settings Specify the delivery server IP address. Note ❒ Specifying the IP address is only possible when "Delivery options" in the Scanner settings is selected. ❖ Setting the scanner to scan documents as a network delivery scanner To scan documents using the scanner or a network delivery scanner, the following settings are required. • Scan setup Make the necessary settings for scanning documents, such as density, resolution and scan size. By specifying settings under user names beforehand, you can easily change them for each document. • Scanner Configuration Make the settings for scanner operation such as the maximum data size that can be sent to the delivery server. Reference For more information, see " P.15 "Initial Scanner Setup" ". 5