Ricoh IS330DC User Manual - Page 25
Initial Scanner Setup
UPC - 026649006722
View all Ricoh IS330DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
2. Initial Scanner Setup To use the scanner as a network scanner, you must make basic network environment settings in addition to the scanner settings . To make the basic settings such as timer setup and network environment settings, see the Network Quick Installation Guide. Then proceed to the detailed network delivery scanner settings. Use as a Network Delivery Scanner This section explains how to make the minimum necessary initial settings to use this scanner as a network delivery scanner. First, you need to set the "Delivery options" in the Scanner settings, then set the delivery server address. Important ❒ These settings should only be made by the network administrator, or under supervision of personnel charged with network management. A Press the {UserTools} key. C Press [↓Next] until [7. Delivery op- tion] appears, and then press[OK]. D Press [↓] and select "Installed". An "*" appears with the current setting. E Press [OK]. ZDLH470 The Scanner Features screen appears. B Press [Config.]. Note ❒ When you set the delivery option to "Installed", you can make the initial settings for the network delivery scanner functions. However, the condition (enabled or disabled) of the network delivery scanner function does not change until you have restarted the scanner. 15