Ricoh IS330DC User Manual - Page 40
Original Orientation and Scan Area Setting
UPC - 026649006722
View all Ricoh IS330DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Sending Originals Original Orientation and Scan Area Setting If originals are set in an upright ( ) position, you must change the original orientation settings when performing duplex scans. Reference For details about how to set the orientation of originals, see P.36 "Sending Scans". 3 Scanning One-sided Originals The setting orientation differs depending on whether the width of original is within or larger than 297 mm (11.7"). Original width 297 mm (11.7") or less Wider than 297 mm (11.7") Setting originals on the platen glass ⇒ P.32 "Setting the Original on the Platen Glass" Place the original so that the top edge touches the top-left of the platen glass. Place the original so that the top edge touches the top-left of the platen glass. Setting originals in the ADF ⇒ P.32 "Setting Originals in the ADF" Place the top edge of the original first. Place the original so that the top edge is set on the far side of the ADF tray. Select [One-sided]. Select [One-sided]. Original orientation settings ⇒ P.36 "Sending Scans" Note ❒ Because this is the initial value of this setting, you do not need to change it. 30