Ricoh Priport HQ7000 PostScript Supplement - Page 23
Cycle Setting, Eco. Mode, Speed Select, Skip Feed, Job Separator, Enable short master, Rotate Image
View all Ricoh Priport HQ7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Windows 2000/XP and Windows Server 2003 ❖ "Cycle Setting" You can select the cycle setting mode of master making and printing. ❖ "Eco. Mode" When set to "Level 1" or "Level 2", the amount of ink consumption is reduced. 1 Note ❒ Level 2 will be lighter than Level 1. ❖ "Speed Select" You can select the printing speed. ❖ "Skip Feed" • Use to make the interval between paper feeds longer, allowing the ink to dry. • Use to print paper longer than the standard size. Limitation ❒ The maximum length of paper that can be printed using Skip Feed is 460 mm. However, when printing on paper longer than 432 mm, the delivered paper may fall off the paper delivery end plate. Therefore, you should hold the paper so that it does not fall off. ❖ "Job Separator" When set to "On", classifying will occur whenever the document data changes. ❖ "Enable short master" You can select whether to set the length of the master automatically. ❖ "Rotate Image" When set to "180 degrees", the image will be rotated 180 degrees and printed. This is very convenient when printing on envelopes. See p.24 "Printing onto envelopes" ❖ "Brightness" The brightness of the whole printed image can be adjusted to one of seven levels. Note ❒ The brightness of the color of characters does not change. ❖ "Line Density (lpi)" You can select the screen ruling (resolution). ❖ "Separate into CMYK" It is possible to output only the color selected from Cyan, Magenta, Yellow, and Black. If "Don't Separate" is selected, separation will not be done. 19