Samsung CLP-775 User Manual (user Manual) (ver.1.01) (English) - Page 26

network setup 3. This chapter gives you step-by-step instructions for setting up the network connected machine and software. This chapter includes: • Network environment • Introducing useful network programs • Using a wired network • Wireless network setup • IPv6 configuration • If you are using wired network environment, see "Using a wired network" on page 26. • If you are using wireless network environment, see "Wireless network setup" on page 32. Network environment You need to set up the network protocols on the machine to use it as your network machine. You can set up the basic network settings through the machine's control panel. The following table shows the network environments supported by the machine: Item Requirements Network interface • • Network operating system • • • • Network protocols • • • • • • Wireless Security • • Ethernet 10/100/1000 Base-TX 802.11 b/g/n Wireless LAN (Optional) Windows 2000/XP/2003/2008/Vista/7/2008 Server R2 Various Linux OS Mac OS X 10.3 ~ 10.6 UNIX TCP/IPv4 DHCP, BOOTP DNS, WINS, Bonjour, SLP, UPnP Standard TCP/IP Printing(RAW), LPR, IPP SNMPv 1/2/3, HTTP(S), Telnet, SMTP, IPSec TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP(S), IPSec (See "IPv6 configuration" on page 39.) Authentication : Open System, Shared Key, WPA Personal, WPA2 Personal (PSK), WPA Enterprise, WPA2 Enterprise Encryption : WEP64, WEP128, TKIP, AES Introducing useful network programs There are several programs available to setup the network settings easily in network environment. For the network administrator especially, managing several machines on the network is possible. Before using the programs below, set the IP adress first. SyncThru™ Web Service Web server embedded on your network machine, which allows you to: • Configure the network parameters necessary for the machine to connect to various network environments. • Customize machine settings. (See "Using SyncThru™ Web Service" on page 60.) SyncThru™ Web Admin Service Web-based machine management solution for network administrators. SyncThru™ Web Admin Service provides you with an efficient way of managing network devices and lets you remotely monitor and troubleshoot network machines from any site with corporate internet access. Download this program from http://solution.samsungprinter.com. SetIP This utility program allows you to select a network interface and manually configure the IP addresses for use with the TCP/IP protocol. (See "Setting IP address" on page 27) TCP/IPv6 is not supported by this program. Using a wired network You must set up the network protocols on your machine to use it on your network. This chapter will show you how this is easily accomplished. You can use network after connecting network cable to a corresponding port on your machine. Printing Network Configuration report You can print a Network Configuration Report from the machine's control panel that will show the current machine's network settings. This will help you to set up a network and troubleshooting problems. Network setup_ 26