Samsung DVD-VR300 User Manual (user Manual) (ver.1.0) (English) - Page 34
VCR Setting
![]() |
View all Samsung DVD-VR300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
System Setup VCR Setting 4 Select "VCR" Using the ❷ buttons, move the selection bar to "VCR", then press ENTER to select. If you want your videotapes to play automatically when you insert them, turn on Auto Play. Only tapes that are missing the Record Safety Tab Note will play automatically when inserted. 1 Open "MENU" With the VCR in Stop or Play mode, press the MENU button. 2 Select "Setup" Using the ❷ buttons, move the selection bar to "Setup" then press ENTER to select. DVD-VIDEO 5 Select "Tape Length" Press the RIGHT button to select the Tape Length. This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180. Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button. : T-120 :n T-160 : T-180 3 Select "System" Use the ❷ buttons to highlight "System" then press the ENTER button. 6 Select "Auto Play" Move the selection bar to "Auto Play," then press right button to select from the following options: • On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed. • Off - Auto play is disabled. : :n On : Off 34 - English
![](/manual_guide/products/samsung-dvdvr300-user-manual-user-manual-ver10-english-c2ef584/34.png)