Samsung NX58R4311SS/AA User Manual - Page 47
Stainless steel surfaces, English 47
View all Samsung NX58R4311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Stainless steel surfaces WARNING Do not use a steel-wool pad or abrasive cleaners on stainless steel surfaces. Abrasive pads and cleaners will scratch the surface and damage the surface finish. NOTE To prevent any discolorations and/or grease stains, we recommend cleaning and removing any spills, spots, and grease from the range after each use. Stainless steel surfaces 1. Wipe off any spills with a damp, soft cloth. 2. Apply an approved stainless steel cleaner to a damp, clean cloth or paper towel. Clean a small area carefully following the instructions on the cleaner. Stainless steel should always be cleaned with the grain in the stainless steel, if applicable. 3. Dry and buff with a clean, dry, soft cloth. 4. Repeat steps 2 and 3 as necessary. WARNING Do not spray any type of cleaner into the manifold panel holes. Within these holes are ignition switches which carry the current that lights the surface burners. Spraying into them could damage the range. Maintaining your appliance NX58R4311SS_AA_DG68-01151A-00_EN.indd 47 English 47 1/25/2019 11:18:29 AM