Samsung NX58R4311SS/AA User Manual - Page 50
burner heads., Lift the burner heads off the valve
View all Samsung NX58R4311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Maintaining your appliance Maintaining your appliance 2. Lift off and remove the burner grates from the cooktop. Make note of the burner sizes and locations of all the surface burners. 3. Lift off burner caps from top of the burner heads. 4. Lift the burner heads off the valve manifolds and starter electrodes. 5. Clean all removable burner parts in warm, soapy water. Do not use steelwool pads or abrasive cleaners on any burner part. 6. Rinse thoroughly and completely dry all parts before they are reassembled. NOTE Starter electrodes are not removable and should only be wiped clean when the controls are in the OFF position. 50 English NX58R4311SS_AA_DG68-01151A-00_EN.indd 50 7. Set all burner heads on top of the manifold valves in the same location you removed them from. The hole on the side of the burner heads goes over the electrodes. The burner heads are correctly installed when they are flat on the top of the manifold valves. 8. Set all burner caps on top of the burner heads. These also need to be flat on top of the burner heads to ensure proper and safe operation. 9. Replace burner grates on top of the range cooktop. 1/25/2019 11:18:35 AM