Samsung NX58R4311SS/AA User Manual - Page 56
START/SET, Self Clean, Clean, WARNING
View all Samsung NX58R4311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Maintaining your appliance Before a self-cleaning cycle NOTE Remove the racks. Leaving the oven racks in the oven during a self-cleaning cycle will discolor the oven racks and make them difficult to slide in and out of position. • Make sure the door lock feature is turned off and the oven is cool. If they are not, the self-cleaning cycle will not start. • When the Lock icon is on, the oven door is locked. • When Loc is shown in the display, it indicates the door lock feature is on. Press and hold the START/SET pad for 3 seconds to unlock the oven controls. WARNING Do NOT use the surface burners while the oven is operating in the self clean mode. NOTE Before a self-cleaning, check whether the door is locked. • A blinking Lock icon indicates the oven door is in the process of being locked. How to set the oven for self-cleaning 1. Make sure the oven door is completely closed. 2. Press the Self Clean pad on the oven control panel. Press the pad once for a 2-hour cleaning cycle, twice for a 3-hour cleaning cycle, or three times for a 4-hour cleaning cycle. Pressing the pad a fourth time will reselect the 2-hour default time. The display will show Clean. Maintaining your appliance 56 English NX58R4311SS_AA_DG68-01151A-00_EN.indd 56 1/25/2019 11:18:46 AM