Samsung Xpress SL-M2021 User Manual Ver.1.0 (English) - Page 98

Wireless network setup Re-connecting to a network Disconnecting from a network When the wireless function is off, the machine automatically tries to re-connect to the access point (or wireless router) with the previously used wireless connection settings and address. In the following cases, the machine automatically re-connects to the wireless network: • The machine is turned off and on again. • The access point (or wireless router) is turned off and on again. To disconnect the wireless network connection, press the (WPS) button on the control panel for more than two seconds. • When the Wi-Fi network is in idle mode: The machine is immediately disconnected from the wireless network and the WPS LED turns off. • When the Wi-Fi network is being used: While the machine waits until the current job is finished, the light blinks fast on the WPS LED. Then, the wireless network connection is automatically disconnected and the WPS LED turns off. Canceling the connection process To cancel the wireless network connection when the machine is connecting to the wireless network, press and release the (Power) button on the control panel. You need to wait 2 minutes to re-connect to the wireless network. 2. Using a Network-connected Machine 98