Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 20

Network configuration (Type2), Confirmation of the network menu, Con the network

Get Sanyo PDG-DET100L - SXGA+ DLP Projector PDF manuals and user guides
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

For the Projector which provides the Network sub menu in the Setting main menu Chapter 2 Installation Network configuration (Type2) Confirmation of the network menu When installing this product to the projector, the network on-screen menu items for this product are activated automatically. If not activated, the product may not have been installed correctly. Please check item "Mounting" (☞ p.14). Configure the network When you connect the projector to the network, the network number of projector must be the same as the network you intend to connect. You should configure projector's network first. This example explains how to set the following configuration. IP Address Subnet Mask Default Gateway DNS : 192.168.1.201 : 255.255.255.0 : 192.168.1.1 : 0.0.0.0 The default network configuration is set as follows. IP Address Subnet Mask Default Gateway DNS : 192.168.0.2 : 255.255.255.0 : 0.0.0.0 : 0.0.0.0 1 Selection of network menu [Network] Turn on the projector and display the menu on the screen. Select the Network icon from the Setting sub menu using the point buttons (d e 7 8) and then press the SELECT button on the remote control or on the projector. Confirm that its mode is set "On". If not, change mode to "On" using the point buttons 7 8. * The above on-screen display may differ from the actual display depending on the functions of the projector you use. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
20
Chapter 2 Installation
Network configuration (Type2)
Confirmation of the network menu
When installing this product to the projector, the network on-screen menu items for
this product are activated automatically. If not activated, the product may not have
been installed correctly. Please check item “Mounting” (
☞
p.14).
Configure the network
When you connect the projector to the network, the network number of projector
must be the same as the network you intend to connect. You should configure pro-
jector’s network first.
This example explains how to set the following configuration.
The default network configuration is set as follows.
IP Address
: 192.168.1.201
Subnet Mask
: 255.255.255.0
Default Gateway
: 192.168.1.1
DNS
: 0.0.0.0
IP Address
: 192.168.0.2
Subnet Mask
: 255.255.255.0
Default Gateway
: 0.0.0.0
DNS
: 0.0.0.0
1
Selection of network menu [Network]
Turn on the projector and display the menu on the screen. Select the
Network
icon
from the
Setting
sub menu using the point buttons (
d e 7 8
) and then press the
SELECT
button on the remote control or on the projector. Confirm that its mode
is set "
On"
. If not, change mode to "
On"
using the point buttons
7
8
.
* The above on-screen display may differ from
the actual display depending on the functions
of the projector you use.
For the Projector which provides the Network sub menu in the Setting main menu