Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 37
Check the status of projector, Items, Description
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Check the status of projector Check the status of projector In the "Power & Status" page, you can control the projector power, and also you can check the status of the projector as follows. To change the page, click on the page number linked text. Items Description Lamp Mode Displays 2 lamps or 4 lamps mode and lamp status as below icons with Lamp1/Lamp2/Lamp3/Lamp4 order. Yellow Normal Red Lamp replacement required Gray Off Gray with X Abnormality of the lamp Accumulated Lamp-use Time Displays the accumulated lamp use time in hour units (h) and displays each time with Lamp1/Lamp2/Lamp3/Lamp4 order. Accumulated Projector-use Time ..........Displays the accumulated projector use time in hour unit (h). Power Status Displays the status of the lamp. Projector Condition* ........Displays the status of the projector's power. * When occurring the internal power failure, The word "Power Failure" and error information is displayed. Input Status Displays the selected input. Selection Displays the selected input mode. Signal Status Displays the signal status of the selected input mode. Inside temperature ..........Displays the internal temperature of the projector. The icons [A], [B], [C] on the page represent the thermal sensors*2 located in the projector. If the temperature at one of those sensors exceeds specified temperature, the appearance of its icon changes to the following alert icon to let users know about the abnormal temperature. Please check surrounding temperature of the projector, check for clogged air filters and check area surrounding the ventilation fans. The icons [A] , [B] and [C] represent the sensors located in the projector as follows: [A]: Surrounding temperature of the projector*1 [B]: Internal temperature of the projector [C]: Internal temperature of the projector*2 *1 The indicated peripheral temperature of the projector is a little higher than actual surrounding tem- perature. *2 Sensor C icon may not indicated depending on the projector's model type. 37 Network Board OWNER'S MANUAL ENGLISH