Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 38
Control the projector, Input
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Controlling the Projector Control the projector The control menus are displayed on the upper side of the page. When you click each control icon, the control page is displayed according to the control menu you selected. The setting method differs depending on the contents of the page. Click on the page number linked texts to change pages and select desired setting items. ✐ Please see the owner's manual of the projector to have the further information of each control item. ✐ If the adjustment items are not required by the projector itself or input signal, the mark of "--" may be indicated. ✐ The control page displays valid control items depending on the selected input mode, signal or functions of the projector you use, therefore, there may be different controls between the described items and actual control items on the page display. ✐ When the projector is in standby, only the timer on the setting menu is effective; others are inactive. Input This function is to select the input mode and slot to the projector. Select the input slot with the radio button, and input source mode with the pulldown menu button. Then set the selected input source and source mode by pressing the Set button. Select a slot with radio buttons. Select a source mode with pull-down menu. Item Description Input(SLOT) ......Displays input number and board name installed in the projector. The setting items differ from the actual depending on the board function. Mounted Board name * Available slots and indications may differ from the actual depending on the projector's model type. 38