Home » Sanyo Manuals » Projectors » Sanyo PDG-DET100L » Manual Viewer

Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 65

Serial Port Switching, Example 3

UPC - 086483074684

Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Control Examples Example 3 Controlling the projector with the serial controller through the serial port (RS-232C). PC2 PC3 PC4 Internet Intranet PJ2 PJ1 PC5 Serial Controller RS-232C serial cable ENGLISH Serial Port Switching When connecting the peripheral equipment to this network board, you should notice the type of serial cables. At the factory shipping, the polarity of serial port on the network board is set to the reverse (cross) type. When connecting the peripheral equipment, please use an optimum serial cable according to the polarity of the port on the equipment. And this product provides a socket to switch the polarity of the serial port. By switching the socket on the board as shown below, it is possible to switch the polarity of the port either the normal (straight) type or the reverse (cross) type. By means of this, you can use both kinds of the serial cable. For further pin allocation please see item "Port Specification".(☞ p. 82) AB Serial port AB Socket Side A: Reverse (cross) type, factory shipped setting Socket Side B: Normal (Straight) type 65 Network Board OWNER'S MANUAL

Section	Page
Compliance	2
Contents	3
Chapter 1 Preparation	5
Features	6
Operating Environment	8
Notices	10
Chapter 2 Installation	11
Flow of installation	12
1 Name and function of each part	13
2 Installation and Network configuration	14
Mounting	14
Connection of LAN cable	15
Network configuration (Type1)	16
Network PIN code setting	18
Network configuration (Type2)	20
Password setting [Display]	22
Notice about system construction	23
Chapter 3 Basic Setting and Operation	25
Login the setting page of the projector	26
1 Enter the IP address	26
2 Select a display mode and login	26
3 Display of main setting page	27
Initial Settings	29
1 Language Setting	29
2 Password Setting	30
3 Date/Time Setting	30
Network Configuration	31
1 Configure the network	31
2 Name the projector	31
E-mail Setting	32
1 Registering SMTP Server, Administrator Address	32
2 Registering and deleting E-mail address	33
3 Condition selection for sending alert message	33
Examples: Type and contents of alert mail	34
Chapter 4 Controlling the Projector	35
Power on/off the projector	36
Check the status of projector	37
Control the projector	38
Input	38
PC Adjustment	39
Save a Set	40
Load a Set	40
System Adjustment	41
Image Adjustment	42
Save a image adjustment value	43
Load a image mode	43
Screen Adjustment	44
Sound Adjustment	44
Setting	45
How to set the Timer	48
Check the Timer events	48
Getting the current time	49
Cancel the timer	49
Service	50
Save Actual Adjustment	51
Check the Save items	51
Control the projector's menu	53
Make a memo	54
Chapter 5 Controlling the Multi-Projectors	55
Multi-Control	56
Register IP address and projector name	57
Check IP address and projector name	57
Exclude/Add/Delete a projector	58
Status	58
Control	59
Load and apply the setting value	59
Control multi-projectors at the same time	60
Chapter 6 Use of Serial Port	61
Serial Port setting	62
Control Examples	64
Use of Telnet	66
Control the projector with Telnet	68
Chapter 7 Appendix:A	69
Examples of Connection	70
Peer-To-Peer connection	70
The gateway (Router) installed in the network	71
Web browser setting	72
Active Script/JavaScript enable	72
Proxy setting	72
Examples: OS/Browsers	73
Windows XP Professional	73
Mac OS 8.6	77
Product specification	81
Port Specification	82
Appendix:B	83

Match case Limit results 1 per page

Network Board

OWNER’S MANUAL

ENGLISH

Control Examples

Example 3

Controlling the projector with the serial controller through the serial port (RS-232C).

Internet

Intranet

PC2

PC4

PC3

PC5

PJ2

PJ1

Serial Controller

RS-232C serial cable

Serial Port Switching

When connecting the peripheral equipment to this network board, you should notice

the type of serial cables. At the factory shipping, the polarity of serial port on the net-

work board is set to the reverse (cross) type. When connecting the

peripheral equip-

ment, please use an optimum serial cable according to the polarity of the port on the

equipment. And this product provides a socket to switch the polarity of the serial

port. By switching the socket on the board as shown below, it is possible to switch

the polarity of the port either the normal (straight) type or the reverse (cross) type. By

means of this, you can use both kinds of the serial cable. For further pin allocation

please see item

"Port Specification".(

☞

p. 82)

Side A: Reverse (cross) type,

factory shipped setting

Side B: Normal (Straight) type

Socket

Serial port