Sanyo PDG-DET100L Instruction Manual, PDG-DET100L POA-MD13NET2 - Page 81
Product specification, Hardware flow control RTS/CTS, Xon/Xoff
UPC - 086483074684
View all Sanyo PDG-DET100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Product specification Specifications Type Network Board LAN interface Applicant regulation IEEE802.3 (10Base-T) IEEE802.3u (100Base-TX) Data transfer speed 10Mbps/100Mbps Data transfer mode Half duplex/Full duplex Terminal 8-pin modular (RJ-45) Network protocol TCP/IP specification TCP/IP Serial interface RS-232C Baud rate 0.3/1.2/2.4/4.8/9.6/19.2/28.8/57.6/115.2 Kbps Flow control Hardware flow control (RTS/CTS, Xon/Xoff) Parity check Odd/Even Terminal D sub 9-pin Male Power source Supplied from the projector Power consumption 3.0 watts Dimensions (W x H x D)........5.39" x 1.18" x 4.33" (137 x 30 x 110mm) Weight 0.34 lbs (155 g) Built-in battery Lithium battery, Type CR2032, 3.0V Operating temperature..........41˚F ~ 95 ˚F (5˚C ~ 35 ˚C) Storage temperature 14˚F ~ 140˚F (-10˚C ~ 60˚C) * The specifications are subject to change without notice. ENGLISH 81 Network Board OWNER'S MANUAL