Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 136

BASIC OPERATIONS FAXING A LARGE NUMBER OF PAGES When you have a large number of pages to fax, scan the pages in batches using the RSPF. A maximum of 100 pages can be placed in the RSPF at once; however, placing pages in batches allows you to scan in more than 100 pages and send them in a single transmission. Note that the number of pages that can be scanned may vary depending on the content of the pages and how much memory is being used. 1 Make sure that the machine is in fax mode SCAN FAX JOB STATUS DATA LINE DATA CUSTOM SE When the [FAX] key light is on, the machine is in fax mode. If the light is not on, press the [FAX] key. 5 Touch the [OK] key. SIZE MANUAL You will return to the OK initial screen. 2-SIDED TABLET JOB BUILD OTATE THE IMAGE 90 DEGREES 2 Place the original. (p.10) Place the first pages that you wish to scan. The many originals icon appears next to the [ORIGINAL] key. EXPOSURE STANDARD RESOLUTION AUTO 8½x11R ORIGINAL 3 Touch the [ORIGINAL] key. STANDARD RESOLUTION If the address directory screen appears, touch the [CONDITION AUTO 8½x11R ORIGINAL SETTINGS] key to display the condition settings screen (p.7). After touching the [ORIGINAL] key, check the original size displayed in the key. If the original size was not correctly detected, set the correct original size. ("MANUALLY SETTING THE SCANNING SIZE" (p.20)) 4 Touch the [JOB BUILD] key. 6 Perform steps 4 to 6 of "BASIC PROCEDURE FOR SENDING FAXES" (p.12). 7 Press the [START] key ( ). Scanning of the originals begins. When scanning is finished, the [READ-END] key appears in the touch panel. SIZE OK MANUAL 2-SIDED TABLET JOB BUILD OTATE THE IMAGE 90 DEGREES 18