Sharp AR-M237 AR-M237 AR-M277 Operation Manual Suite - Page 194
ADDRESS REVIEW] key., end receiving machines, touch
View all Sharp AR-M237 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
PROGRAMMING 6 Enter the numbers of the end receiving machines. Touch a key and then enter the number of an end receiving machine as explained below. After entering a number, touch the [NEXT ADDRESS] key to enter the number of the next end receiving machine. DIRECT ADDRESS / RELAY GROUP NEXT EXIT RECIPIENT DIAL REC. SPEED REC. RAPID GROUP OK REC. REC. ADDRESS REVIEW [DIAL] key Enter the fax number of the receiving machine with the numeric keys. [RAPID] key Touch this key to enter a rapid number from 01 to 99 that is stored in the relay machine. You can also enter a 3-digit rapid number from 001 to 099 (enter the lower two digits of the number).* Touch the or key to enter the number. Continuing to touch the key makes the number change quickly. [SPEED] key Touch this key to enter a speed dial number from 00 to 99 that is stored in the relay machine. You can also enter a 3-digit rapid number from 100 to 199 (enter the lower two digits of the number).* Touch the or key to enter the number. Continuing to touch the key makes the number change quickly. [GROUP] key Touch this key to enter a group key number from 01 to 99 that is stored in the relay machine. You can also enter a 3-digit rapid number from 201 to 299 (enter the lower two digits of the number).* Touch the or key to enter the number. Continuing to touch the key makes the number change quickly. * The numbers entered will vary depending on the model used for the relay machine. For more information, consult your SHARP service center. (Also see the operation manual for copier.) 7 Touch the [OK] key. CANCEL OK The screen for entering the numbers of the end receiving machines appears. 8 Repeat steps 6 and 7 until all end receiving machines are entered. 9 To check the entered numbers of the end receiving machines, touch the [ADDRESS REVIEW] key. REC. A list of the entered end receiving machines is REC. ADDRESS REVIEW displayed. You can delete a machine by touching it. When a message appears asking if you want to delete the destination, touch the [YES] key. Touch each tab at the bottom of the list to show the numbers on that tab. 10 Touch the [OK] key. The destination/relay group storing screen appears. 11 If you are finished storing relay groups, touch the [EXIT] key. If you wish to store another relay group, touch the [NEXT] key. If you touch the [EXIT] key, you will return to the screen of step 4 on page 66. If you touch the [NEXT] key, the screen for storing a new relay group appears. 76