Sharp AR-M355U AR-M355 AR-M455 Operation Manual Suite - Page 90
Copying from the document glass, sided copies of 1-sided originals
View all Sharp AR-M355U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
NORMAL COPYING Copying from the document glass When copying originals which cannot be fed from the automatic document feeder such as thick originals, open the document cover and copy the originals from the document glass. ■ 1-sided copies of 1-sided originals Original Copy 1 Place the original on the document glass. (pages 4-3 to 4-6) Original scale mark Original scale mark 5½ x 8½ or A5 8½x11 or A4 8½x14 or B4 11x17 or A3 8½x11R or A4R ●Align the corner of the original with the tip of the arrow mark on the document glass scale. ●Place the original in the appropriate position for its size as shown above. 2 Ensure that the 1-sided to 1-sided copy mode is selected. ORIGINAL 81/2x11 The one-sided to onesided mode is selected when no icon for a two- 81/2x11 81/2x11 81/2x11 11x17 81/2x11R sided mode appears in the dashed area on the display. If an icon appears, perform steps 3 to 5 on page 4-7 and then go to step 3. 3 Ensure that paper of the same size as the original is automatically selected*. UTO The selected tray will be EXPOSURE highlighted or the AUTO 81/2x11 PAPER SELECT 100% requOirePdYsiRzeA.TIO message "LOAD xxxxxx 4 PAPER." will appear. If the message appears, load paper in a paper tray with paper of the Even if the message above is displayed, copying can be performed onto the currently selected paper. * The following requirements must be satisfied. Originals of a standard size (11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2"R (A3, B4, A4, A4R, B5, B5R or A5)) are set and the auto paper select function is enabled. READY TO SCAN FOR COPY. If originals of a size other than the sizes above are 1. 81/2x11 PLAIN to be copied, manually 81/2x11 2. 11x17 PLAIN select the desired paper PLAIN 3. 11x17 PLAIN size by touching the 4. 81/2x11 PLAIN [PAPER SELECT] key and then touching the desired paper size selection key. The selected key will be highlighted and the paper selection screen will close. To close the paper selection screen without making a selection, touch the [PAPER SELECT] key. 4-11