Sharp BD-HP20U BD-HP20U Operation Manual - Page 22

Before Starting Playback Loading the Batteries in the Remote Control 1 Press down on the tab in the direction of the arrow to remove the battery cover. Approximate operating range of remote control Remote control sensor 2 Load the two R-03 size batteries ("AAA" size, UM/SUM-4) supplied with the remote control unit. Make sure that the battery poles m and n are positioned as indicated. 30º 30º 7 m Remote control unit Connecting the Power Cord Plug the supplied AC cord into the AC IN terminal on the rear of the Player. Then plug into AC outlet. 3 Slide the battery cover in the direction of the arrow until it clicks. To AC IN terminal NOTE • Do not subject the remote control unit to shock, water or excessive humidity. • The remote control unit may not function if the Player's remote sensor is in direct sunlight or any other strong light. • Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly. • Do not mix old and new batteries, or mix different brands. • Remove the batteries if you will not use the remote control unit for an extended period of time. To AC outlet NOTE • Place the Player close to the AC outlet, and keep the power plug within reach. • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH THE UN-INSULATED PARTS OF ANY CABLES WHILE THE AC CORD IS CONNECTED. • The STANDBY indicator blinks while the Player is preparing for starting up. You cannot turn the Player on until the STANDBY indicator stops blinking. 20