Sharp BD-HP20U BD-HP20U Operation Manual - Page 37

SETTINGS 2 This sets the audio output mode for DIGITAL AUDIO OUT (COAXIAL jack / OPTICAL terminal) when selecting OPTICAL/COAXIAL DIGITAL OUTPUT or 2ch AUDIO OUTPUT MENU [AUDIO VIDEO SETTINGS - AUDIO OUT] TV ASPECT RATIO COMPONENT VIDEO OUT HDMI VIDEO OUT HDMI AUTO DETECTION AUDIO OUT DYNAMIC RANGE CONTROL DOLBY DIGITAL BITSTREM DTS BITSTREM AAC BITSTREM PCM (STEREO) PCM (STEREO) PCM (STEREO) CONFIRM DOLBY DIGITAL DTS AAC BITSTREAM PCM (STEREO) DOLBY DIGITAL Selected item BITSTREAM DTS AAC PCM (STEREO) Description • Select this when connecting to SURROUND equipment with a built-in decoder for DOLBY DIGITAL, DTS, AAC. • Setting to BITSTREAM will output each audio signal by BITSTREAM. • Select this when connecting to 2 channel stereo audio equipment. • Setting to PCM (STEREO) will output by converting each audio signal into PCM 2channel audio signal. DYNAMIC RANGE CONTROL • This lets you adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialogue. MENU [AUDIO VIDEO SETTINGS] AUDIO VIDEO SETTINGS SPEAKER SETTINGS QUICK START AUTO POWER OFF AQUOS LINK PLAYBACK SETTING FRONT DISPLAY / LED VERSION SOFTWARE UPDATE SYSTEM RESET MENU [AUDIO VIDEO SETTINGS - DYNAMIC RANGE CONTROL] TV ASPECT RATIO COMPONENT VIDEO OUT HDMI VIDEO OUT HDMI AUTO DETECTION AUDIO OUT DYNAMIC RANGE CONTROL NORMAL SHIFT NORMAL*: The some audio output range is played as the original recorded audio output range. SHIFT: When Dolby Digital audio is played back, the dynamic range of the audio is adjusted so that the dialogue portion can be heard easily. (If the audio sounds abnormal, set to "NORMAL".) SHIFT, NORMAL * Lower the audio volume before setting. If you do not do so, the speakers may emit a loud sound or excessive output may be applied to the speakers. q Settings 35