Sharp MX-M363N Installation Manual - Page 24
Side plate size switch, Auxiliary guide size switch, Rear edge shaft switch, F side
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
a. Side plate size switch 1) Remove four fixing screws (blue screws) which are fixing the upper and the lower sections of the side plate F and the side plate R. F side R side 2) Loosen the fixing screw (flat screw 1pc) of the auxiliary guide. 3) Set the mark position ( ) of the auxiliary guide and the cassette R to the size from A4 to LT, and fix with the fixing screw (flat screw). 2) Adjust the mark position of the tray and the side plates in the lower section of the side plates F/R according to the desired size. Also adjust the upper section according to the desired size, and fix with the four fixing screws (blue screws). A4 LT At that time, set the mark position ( ) of the auxiliary guide and the cassette R to the same scale of the mark position ( ) of the side plate R and the size guide adjustment plate confirmed in procedure 1). (If the scale of the size guide adjustment plate is at the center, set it to the center. If the size guide adjustment plate is in 1mm in the front side, set it in 1mm in the front side.) c. Rear edge shaft switch 1) Remove the rear edge shift fixing screw (blue screw) which is fixing the shaft to the right side inside the tray, and remove the rear edge shaft. F side R side 2) Tighten the removed rear edge shaft with the fixing screw (blue), and store it in the storage space inside the front cabinet. b. Auxiliary guide size switch 1) When switching the size of the side plate R, check to confirm the mark position ( ) of the side plate R and the size guide adjustment plate. MX-M503N MX-LCX1 3 - 5