Sharp MX-M363N Installation Manual - Page 47

Remove the screw, and remove the dummy punch guide.

Get Sharp MX-M363N PDF manuals and user guides View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

2) Remove the screw, and remove the rear cover. 5) Remove the screw, and remove the dummy punch guide. 3) Remove the screw, and remove the front lower cover. 6) Install the punch unit to the saddle finisher. Fix the punch unit with the screw which was removed from the dummy punch guide. * Before installing, remove the dust box. * Check to confirm that the punch guide pin is securely inserted into the guide pin insertion hole of the finisher. * Check to confirm that the pawl (A) is engaged with the plate frame. 1 2 4) Open the front cover. Remove the screw, and remove the front inner cover. A 7) Connect the harness on the punch unit side with the PWB on the finisher side. MX-M503N MX-PNX5A/B/C/D 8 - 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
MX-M503N
MX-PNX5A/B/C/D
8 – 2
2)
Remove the screw, and remove the rear cover.
3)
Remove the screw, and remove the front lower cover.
4)
Open the front cover. Remove the screw, and remove the front
inner cover.
5)
Remove the screw, and remove the dummy punch guide.
6)
Install the punch unit to the saddle finisher.
Fix the punch unit with the screw which was removed from the
dummy punch guide.
*
Before installing, remove the dust box.
* Check to confirm that the punch guide pin is securely
inserted into the guide pin insertion hole of the finisher.
*
Check to confirm that the pawl (A) is engaged with the plate
frame.
7)
Connect the harness on the punch unit side with the PWB on
the finisher side.
2
1
A