Sharp MX-M363N Installation Manual - Page 75
MX-PB10, 1. Unpacking, A. Parts included, 2. Installation, A. Preparation for enabling the MX-PB10 - manual user guide
View all Sharp MX-M363N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
M[1X-4M]50M3NX-PB10 1. Unpacking A. Parts included Service Manual 1 2 No. Packed part names 1 CD-ROM (Driver) 2 Product key sheet (With Application Number) Quantity 1 1 2. Installation A. Preparation for enabling the MX-PB10 1) To enable the MX-PB10, enter the product key by the key operation of the copier machine. a) Press the system setting key on the operation panel. b) Select [Product key input] key display page, and touch the key. c) Touch the input column. d) Enter the product key with numeric key (10-key), and touch [Registration] key. 2) After completion of entry of the product key, turn OFF the power switch on the operation panel. Turn OFF the main power switch, then turn ON the power switch and the main power switch again. 3) Use the attached CD-ROM to install the driver. For installing procedures, refer to the software setup guide. Installation of the driver must be performed by the user or the serviceman with assistance or the user. Please keep below important information. This information will use for other products. APPLICATION NUMBER MACHINE SERIAL NUMBER PRODUCT KEY MX-M503N MX-PB10 14 - 1