Sony AVD-S500ES Operating Instructions - Page 59

Other Operations Controlling Other Units with the Supplied Remote By adjusting the remote signal, you can control your TV, satellite receiver or VCR with the supplied remote. Notes • If you enter a new code number, the code number previously entered will be erased. • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. Tip You can set the code number for your TV or satellite receiver separately. Controlling TVs with the remote TV ?/1 RM SET UP AV ?/1 Number* buttons ENTER TV CH +/- TV VOL +/- TV/VIDEO 1 Press RM SET UP and AV [/1 simultaneously. The RM SET UP indicator lights up. 2 Press TV [/1. The RM SET UP indicator flashes once. 3 Enter your TV manufacturer code (see the table) using the number buttons. 4 Press ENTER. When registration is completed, the RM SET UP indicator flashes twice. If registration is incomplete, the RM SET UP indicator rapidly flashes 4 times. * Use the number buttons only to enter the code number of controllable TVs. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. Other Operations Manufacturer Code number SONY 501,502 AIWA 501,502 DAEWOO 504,505,506,507,515,544 FISHER 508 GOLDSTAR 503,511,512,515,534,544 GRUNDIG 517,534 HITACHI 513,514,515,544 ITT/NOKIA 521,522 JVC 516 MAGNAVOX 503,518,544 MITSUBISHI/MGA 503,519,544 NEC 503,520,544 PANASONIC 509,524 PHILIPS 515,518 PIONEER 509,525,526,540 RCA/PROSCAN 510,527,528,529,544 SAMSUNG 503,515,531,532,533,534,544 SANYO 508,545,546,547 SHARP 535 TELEFUNKEN 523,536,537,538 THOMSON 530,537,539 TOSHIBA 535,540,541 ZENITH 542,543 Controlling the TV You can control your TV using the buttons below. By pressing TV [/1 TV/VIDEO You can Turn the TV on or off. Switch the TV's input source between the TV and other input sources. continued 59US