Sony AVD-S500ES Operating Instructions - Page 60

By pressing TV VOL +/- TV CH +/- You can adjust the TV volume. change the TV channel. Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above. Controlling satellite receivers with the remote RM SET UP AV ?/1 TV/SAT Number buttons ENTER 1 Press RM SET UP and AV [/1 simultaneously. The RM SET UP indicator lights up. 2 Press TV/SAT. 3 Enter your Satellite receiver's manufacturer code (see the table) using the number buttons. 4 Press ENTER. When registration is completed, the RM SET UP indicator flashes twice. Code numbers of controllable satellite receivers If more than one code number is listed, try entering them one at a time until you find the one that works with your satellite receiver. Manufacturer SONY JERROLD/G.I. PANASONIC RCA S.ATLANTA Code number 801,802,803,804 806,807,808,809,810,811, 812,813,814 818 805,819 815,816,817 Controlling the satellite receiver Press TV/SAT. Sources that can be controlled by the remote change depending on the setting of TV/SAT. You can control your satellite receiver using the buttons below. By pressing You can AV [/1 Turn the satellite receiver on or off. JUMP Jump Number buttons Select a channel. ENTER Confirm the selected channel. AUDIO Change the audio. CH +/- Change channels. TOP MENU/ GUIDE Display the program guide. AV MENU Display the menu. DVD DISPLAY Turn the display on or off. O RETURN/EXIT Return to the previous display in the program guide or menu. C/X/x/c/ ENTER Select the item in the program guide or menu. Notes • Depending on the satellite receiver, you may not be able to control your satellite receiver or to use some of the buttons above. • To operate a DVD player, press DVD, and then change the mode of the receiver to DVD. 60US