Sony AVD-S500ES Operating Instructions - Page 71

Settings and Adjustments, Setting restrictions, Specifying the surround speaker, position and height

Page 71 highlights

Settings and Adjustments SURROUND LARGE (BEHIND, LOW), LARGE (BEHIND, HIGH), LARGE (SIDE, LOW), LARGE (SIDE, HIGH), SMALL (BEHIND, LOW), SMALL (BEHIND, HIGH), SMALL (SIDE, LOW), SMALL (SIDE, HIGH): Specify the size, position, and height to implement the Digital Cinema Surround modes in the sound field (page 46) properly. For details, see "Specifying the surround position and height" as below. NONE: Select this if no surround speaker is used. SURROUND BACK LARGE: Normally select this. SMALL: Select this if small speakers are used for the surround back speaker. NONE: Select this if no surround back speaker is used. SUBWOOFER YES: Select this if a subwoofer is used. NONE: Select this if no subwoofer is used. Setting restrictions Size setup has some restrictions. Some settings are changed automatically. If "FRONT" is set to "SMALL" "CENTER," "SURROUND," and "SURROUND BACK" must be set to either "SMALL" or "NONE." If "SURROUND" is set to either "LARGE" or "SMALL" "SURROUND BACK" must be set to the same setting or "NONE." If "SUBWOOFER" is set to "NONE" "FRONT" must be set to "LARGE." Notes • When you select an item, the sound cuts off for a moment. • Depending on the settings, subwoofer output may be excessive. Specifying the surround speaker position and height If you select anything other than "NONE" in "SURROUND," specify the size, position, and height of the surround speakers. BEHIND (LOW): Select this if the surround speakers are located in section B and D. BEHIND (HIGH): Select this if the surround speakers are located in section B and C. SIDE (LOW): Select this if the surround speakers are located in section A and D. SIDE (HIGH): Select this if the surround speakers are located in section A and C. These parameters are not available when "SURROUND" is set to "NONE." Position diagram A B Height diagram 90 A 45 B 20 C C 60 D D 30 Tip Surround speaker position and height is designed specifically for CINEMA STUDIO EX mode. continued 71US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184

Settings and Adjustments
71
US
Setting restrictions
Size setup has some restrictions. Some settings
are changed automatically.
If “FRONT” is set to “SMALL”
“CENTER,” “SURROUND,” and
“SURROUND BACK” must be set to either
“SMALL” or “NONE.”
If “SURROUND” is set to either “LARGE” or
“SMALL”
“SURROUND BACK” must be set to the same
setting or “NONE.”
If “SUBWOOFER” is set to “NONE”
“FRONT” must be set to “LARGE.”
Notes
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings, subwoofer output may be
excessive.
Specifying the surround speaker
position and height
If you select anything other than “NONE” in
“SURROUND,” specify the size, position, and
height of the surround speakers.
These parameters are not available when
“SURROUND” is set to “NONE.”
Tip
Surround speaker position and height is
designed specifically for CINEMA STUDIO
EX mode.
SURROUND
LARGE (BEHIND, LOW),
LARGE (BEHIND, HIGH),
LARGE (SIDE, LOW),
LARGE (SIDE, HIGH),
SMALL (BEHIND, LOW),
SMALL (BEHIND, HIGH),
SMALL (SIDE, LOW),
SMALL (SIDE, HIGH):
Specify the size, position, and height
to implement the Digital Cinema
Surround modes in the sound field
(page 46) properly. For details, see
“Specifying the surround position
and height” as below.
NONE: Select this if no surround
speaker is used.
SURROUND
BACK
LARGE
: Normally select this.
SMALL: Select this if small
speakers are used for the surround
back speaker.
NONE: Select this if no surround
back speaker is used.
SUBWOOFER
YES
: Select this if a subwoofer is
used.
NONE: Select this if no subwoofer
is used.
BEHIND (LOW):
Select this if the surround
speakers are located in section
B
and
D
.
BEHIND (HIGH):
Select this if the surround
speakers are located in section
B
and
C
.
SIDE (LOW):
Select this if the surround
speakers are located in section
A
and
D
.
SIDE (HIGH):
Select this if the surround
speakers are located in section
A
and
C
.
90
20
45
A
A
B
B
Position diagram
60
30
C
C
D
D
Height diagram
continued