Sony CHC-CL1 Operating Instructions - Page 11

CD Programing CD tracks - Program Play You can make a program of up to 25 tracks. 1 Press FUNCTION repeatedly to switch the function to CD. 2 Press PLAY MODE/DIRECTION repeatedly until "PGM" appears. 3 Press CD 1 - 3 to select a CD. To program all the tracks on a CD at once, proceed to step 5 with "AL" displayed. 4 Turn ./> (or press . or > on the remote) until the desired track number appears. Playing time of the selected track 6 To program additional tracks, repeat steps 3 to 5. 7 Press CD NX (or N on the remote). To Cancel Program Play Do this Press PLAY MODE/ DIRECTION repeatedly until "PGM" and "SHUFFLE" disappear. Check the program Press CHECK on the remote repeatedly in stop mode. After the last track, "Check End" appears. Clear a track Press CLEAR on the remote in from the end stop mode. Clear a specific track Press CHECK on the remote repeatedly in stop mode until the number of the track to be erased lights up, then press CLEAR. Add a track to Perform steps 3 to 5. the program in stop mode Selected CD and track number 5 Press ENTER/YES on the remote. The track is programed. "STEP" appears, followed by the number of the track in the programed sequence. The number of the last programed track appears, followed by the total playing time of the program. Total playing time Tips • The program you made remains after Program Play finishes. To play the same program again, press CD NX. appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over. Last programed track number 11