Sony CHC-CL1 Operating Instructions - Page 17

Tuner/Tape - Play Tape - Play Loading a tape 1 Open the lid with your hand and insert a tape. With the side you want to play facing up 2 Close the lid with your hand. To remove the tape, lift up the tape from the side as shown in the illustration. Playing a tape 1 Press FUNCTION repeatedly to switch the function to TAPE. 2 Press PLAY MODE/DIRECTION repeatedly until g appears to play one side or h (or j*1) to play both sides. 3 Press TAPE nN (or N on the remote). Press TAPE nN (or N on the remote) again to play the bottom side. *1 The tape deck stops automatically after repeating the sequence five times. To Do this Stop play Press x. Pause Press X on the remote. Press again to resume play. Find the succeeding track (AMS*2) Turn ./> clockwise (or press > on the remote) for the top side during playback. Turn ./> counterclockwise (or press . on the remote) for the bottom side during playback. Find the preceding track (AMS*2) Turn ./> counterclockwise (or press . on the remote) for the top side during playback. Turn ./> clockwise (or press > on the remote) for the bottom side during playback. Fast-forward or Press m or M. rewind *2 The Automatic Music Sensor (AMS) feature detects a blank space of more than four seconds between tracks to locate tracks quickly. Tip The deck cannot identify the tape type, such as TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal). Notes • If you do not close the lid, you cannot start playing the tape. • If you open the lid while playing a tape, the deck stops playing. • The AMS feature may not work in the following cases: - the blank space between tracks is four seconds or less. - the TV is too close to the system. 17